Loading...
HomeMy WebLinkAbout305.002e - Kenwood TK-7150 Mobile Radio TRAINING AND EQUIPMENT MANUAL COMMUNICATIONS COMPONENTS 305.002e KENWOOD TK-7150 MOBILE RADIO EFFECTIVE: SEPTEMBER 2013 Current Revision Date: 12/28/2018 Next Revision Date: 12/28/23 Author’s Name/Rank: Justin Hill Captain Review Level: 1 PURPOSE The purpose of this policy is to familiarize members with the components, features, use, maintenance, and troubleshooting of the Kenwood TK-7150 mobile radio. APPLICATION The Kenwood TK-7150 portable radio is used on many Fresno Fire Department (FFD or Department) apparatus. Features of the radio include: 128 channels Alpha-numeric display 45 watts power output 16 repeater tones available One direct access channel button (home channel) The 128 channels are divided into groups designed by the Communications Team to meet Department needs. The radio can select one of the 16 Continuous Tone-Coded Squelch System (CTCSS) for accessing different repeaters OPERATIONAL POLICY This section intentionally left blank. OPERATIONAL GUIDELINE This section intentionally left blank. Section 305.002e Page 1 of 10 PROCESS Radio Operations Refer to the diagram below of the Kenwood TK-7150 mobile radio. The following is a summary of the functions for operating the radio: 1. Power: Press this button once to turn on the radio; press and hold this button for one second to turn off the radio. 2. Volume Control: Turn the volume control knob clockwise to increase the volume and counter-clockwise to decrease the volume of the radio. 3. Channel Selector: Rotate the knob to select desired channel. Display Area The display may show the following indicators: TA Indicates the radio is in Talk Around mode SCN Indicates the Scan feature is activated OS Operator Selectable” tone Indicates the channel is in the scan list A down arrow above the channel display indicates the channel is in the scan list METRO FRN Channel name displayed with up to 11 characters Section 305.002e Page 2 of 10 User-Defined Buttons HC Home Channel This button is preprogrammed to go directly to the main dispatch channel ^ Changes group TA Talk Around, direct, or car-to-car SCN Button used to turn scan on and off D/A Button used to delete or add a channel from scan OST Hold this button down to select an “Operator Selectable” Tone The following is a more detailed description of the function of each button with corresponding diagram: Home Channel (HC): Press this button to go directly to the home channel from any group in the radio. Section 305.002e Page 3 of 10 Talk Around (TA): Press this button to talk directly to another radio without using a repeater (car-to-car). Notice the “TA” symbol in the display. Scan Feature (SCN): Press SCN to start or stop the scanning sequence. Only one group can be scanned at a time. When activating a scan, a tone sounds and the “SCN” icon appears on the display. When a signal is received while scanning, the scan will halt, the audio is unmuted, and the channel name appears in the display. Section 305.002e Page 4 of 10 The Kenwood TK-7150 radio has the capability to add or delete any channel from the scan list within the same group. To do so, rotate the channel selector knob to the desired channel to be added (or deleted) in scan and press the D/A (Delete/Add) button. Press once to add a channel and press once to remove the channel from scan. The steps to add or delete a channel to scan are as follows: 1. Confirm what group is being scanned. 2. Ensure Scan is off. 3. Rotate the channel selector knob to the channel being added to scan. 4. Press the D/A button. The down arrow appears in the display and the channel is now in the scan list. Move to the next channel to add and repeat above. 5. To remove a channel from the scan list, repeat as above except once the desired channel is selected, press the D/A button. The down arrow icon will disappear from the display and the channel will be removed from the scan list. 6. After adding/deleting the desired channels, press the SCN button to enable the scanning sequence. Section 305.002e Page 5 of 10 Operator Selectable Tone (OST): Press and hold this button (for two seconds) to enable the Operator Selectable Tone function. When enabled, the display screen will blink “TONE OFF”. The channel selector knob is used to cycle through up to 16 custom CTCSS encode tones for access to repeaters. Once the desired tone is found, press OST to select the tone. The display screen will revert to the channel selected and the “OS” label will be seen in the upper, right portion of the display. The OST can be disabled by pressing the OST button. Note: The Kenwood TK-7150 radio is not programmed currently to memorize the selected OST. Once the OST is selected for a particular channel, it will be erased if the channel is changed or the radio power turned off. Section 305.002e Page 6 of 10 See the following pages for a reference guide for operating the Kenwood TK-7150 mobile radio. Section 305.002e Page 7 of 10 KENWOOD TK-7150 REFERENCE GUIDE Home Channel (HC): Press this button to go directly to the home channel from any group in the radio. Talk Around (TA): Press the TA button to talk directly to another radio without using a repeater (car-to-car). Notice the TA symbol in the display. Scan Feature (SCN): Press SCN to start or stop the scanning sequence. Only one group can be scanned at a time. When activating a scan, a tone sounds and the SCN icon appears on the display. When a signal is received while scanning, the scan will halt, the audio is unmuted, and the channel name appears in the display. The Kenwood TK-7150 radio has the capability to add or delete any channel from the scan list within the same group. To do so, rotate the channel selector knob to the desired channel to be added (or deleted) in scan and press the D/A (Delete/Add) button. Press once to add a channel and press once to remove the channel from scan. The steps to add or delete a channel to scan are as follows: 1. Confirm what group is being scanned. 2. Assure Scan is off. 3. Rotate the channel selector knob to the channel being added to scan. 4. Press D/A button. The down arrow appears in the display. The channel is now in the scan list. Move to the next channel to add and repeat above. Section 305.002e Page 8 of 10 5. To remove a channel from the scan list, repeat as above except once the desired channel is selected, press the D/A button. The down arrow icon will disappear from the display and the channel will be removed from the scan list. 6. After adding or deleting the desired channels, press the SCN button to enable the scanning sequence. Operator Selectable Tone (OST): Press and hold this button (for two seconds) to enable the Operator Selectable Tone function. When enabled, the display screen will blink TONE OFF. The channel selector knob is used to cycle through up to 16 custom CTCSS encode tones for access to repeaters. Once the desired tone is found, press OST to select the tone. The display screen will revert to the channel selected and the OS label will be seen in the upper, right portion of the display. The OST can be disabled by pressing the OST button. Once the OST is selected for a particular channel, it will be erased if the channel is changed or the radio power turned off. Section 305.002e Page 9 of 10 INFORMATION This section intentionally left blank. DEFINITIONS This section intentionally left blank. CROSS REFERENCES No cross references recognized. Section 305.002e Page 10 of 10